Strong hydraulic power chucks are exact crossovers from Kitagawa. The parts are interchangeable with Kitagawa. These AutoStrong chucks are 40-50% less price than Kitagawa. Strong 3-jaw power chucks come with metric serration master jaws, one set of soft blank top jaws, draw nut & wrench, T-nuts.
L20000071

For more details or to order, please select: Power chuck

Power chuck
A00 THROUGH HOLE POWER CHUCK 18" 3 JAWS N218
N-200 Type 3-jaw Through-Hole Power Chucks used with large bores. Adapter is excluded.
L30000769
Power chuck N-204
Power chuck N-205
Power chuck N-206
Power chuck N-208
Power chuck N-210
Power chuck N-212
Power chuck N-215
Power chuck N-220
Power chuck N-224
Power chuck
A08 THROUGH HOLE POWER CHUCK 18" 3 JAWS N218A8
N-200A Type 3-jaw Through-Hole Power Chuck

  • Among wedge type power chucks N-200A Type is used with largest bores
  • N-200A type Chucks are assembled with adapter for ASA B5.9 type A spindles
  • Adapter is included

    OEM Part Code: Kitagawa #B-200A
    L30000770
  • A11 THROUGH HOLE POWER CHUCK 18" 3 JAWS N218A11
    A15 THROUGH HOLE POWER CHUCK 18" 3 JAWS N218A15
    Power chuck N-205A4
    Power chuck N-205A5
    Power chuck N-206A5
    Power chuck N-208A5
    Power chuck N-208A6
    Power chuck N-210A6
    Power chuck N-210A8
    Power chuck N-212A11
    Power chuck N-212A6
    Power chuck N-212A8
    Power chuck N-215A11
    Power chuck N-215A8
    Power chuck N-220A11
    Power chuck N-220A15
    Power chuck N-224A11
    Power chuck N-224A15
    Power chuck
    A4 THROUGH HOLE POWER CHUCK 6" 2 JAW
    NT-200A Type 2-jaw Through-Hole Power Chuck

  • All sliding surfaces are hardened and ground for accurate actual running and long service repeatability. Lubrication nipple in each base jaw
  • Base jaw: 1.5mm x 60° serration
  • Mounting: Adapter mounting to fit with DIN, ISO, BS, ASA B5.9 type A spindles
  • Adapter is included

    OEM Part Code: Kitagawa #BT-200A
    L30000771
  • A5 THROUGH HOLE POWER CHUCK 6" 2 JAW
    Power chuck NT-205A4
    Power chuck NT-208A5
    Power chuck NT-208A6
    Power chuck NT-210A6
    Power chuck NT-210A8
    Power chuck NT-212A11
    Power chuck NT-212A8
    Power chuck NT-215A11
    Power chuck NT-215A8
    Power chuck NT-218A11
    Power chuck NT-218A15
    Power chuck NT-218A8
    Power chuck
    A11 THROUGH HOLE POWER CHUCK 12" 4 JAWS
    NIT-200A Type 4-jaw Through-Hole Power Chuck

  • All sliding surfaces are hardened and ground for accurate actual running and long service repeatability. Lubrication nipple in each master jaw
  • Master jaw: 1.5mm x 60° serration
  • Mounting: Adapter mounting to fit with DIN, ISO, BS, ASA B5.9 type A spindles
  • Adapter: included
    L30000778
  • A11 THROUGH HOLE POWER CHUCK 15" 4 JAWS
    A11 THROUGH HOLE POWER CHUCK 18" 4 JAWS
    A11 THROUGH HOLE POWER CHUCK 24" 4 JAWS
    A15 THROUGH HOLE POWER CHUCK 18" 4 JAWS
    A15 THROUGH HOLE POWER CHUCK 24" 4 JAWS
    A5 THROUGH HOLE POWER CHUCK 6" 4 JAWS
    A5 THROUGH HOLE POWER CHUCK 8" 4 JAWS
    A6 THROUGH HOLE POWER CHUCK 8" 4 JAWS
    A6 THROUGH HOLE POWER CHUCK 8" 4 JAWS (M60x1.5)
    A8 THROUGH HOLE POWER CHUCK 10" 4 JAWS
    A8 THROUGH HOLE POWER CHUCK 12" 4 JAWS
    A8 THROUGH HOLE POWER CHUCK 15" 4 JAWS
    A8 THROUGH HOLE POWER CHUCK 18" 4 JAWS
    Power chuck
    Power chuck NHT-208A5
    NHT-200A Type 2-jaw and 3-jaw Through-Hole Power Chuck

  • The chucks are made from high grade alloy steel. All sliding surfaces are hardened and ground to increase running accuracy and longer service life
  • Gripping of round or irregular workpiece does not need to change the chuck
  • The chucks are designed according to ASA B5.9 type A spindle
  • Adapter is included
    L30000779
  • Power chuck NHT-208A6
    Power chuck
    Power chuck NB-208A6
    NB-200A Type 3-jaw extra large Through-Hole Power Chuck

  • Approximately 20% higher speed, higher gripping force and larger bore compared with regular chucks
  • The NB-200A Type chucks are designed according to ASA B5.9 type A spindle
  • The chucks are made from high grade alloy steel. All sliding surfaces are hardened and ground for accurate actual running and long service repeatability
  • Adapter is included
    L30000782
  • Power chuck NB-210A8
    Power chuck NB-212A11
    Power chuck NB-212A6
    Power chuck NB-212A8
    Power chuck NB-215A15
    Power chuck NB-215A8
    Power chuck NB-2185A15
    Power chuck NB-306A5
    Power chuck
    CHUCK POWER 06" TYPE V-206 OEM KITAGAWA N-206 B-206
    3-jaw Wedge-type non Through-Hole Power Chuck

  • The chucks are of high performance similar with N-series
  • Metric or UNC socket head cap screws are supplied for installing the chuck to the spindle
  • Adapter is excluded

    OEM Part Code: Kitagawa #N-200
    L30000783
  • CHUCK POWER 08" TYPE V-208 OEM KITAGAWA N-208
    CHUCK POWER 10" TYPE V-210 OEM KITAGAWA N-210
    CHUCK POWER 12" TYPE V-212 OEM KITAGAWA N-212
    CHUCK POWER 15" TYPE V-215 OEM KITAGAWA N-215
    CHUCK POWER 18" TYPE V-218 OEM KITAGAWA N-218
    Power chuck
    Power chuck VIT-212A8
    2-jaw and 4-jaw Wedge type Non Through-Hole Power Chuck

  • Suitable for special applications - to hold special shape workpieces, such as square bar or flanges which are not possible to be clamped by a 3-jaw chuck
  • Model VT-200A & VIT-200A chucks are interchangable with those of V-200 or V-200A series
  • They are also featured by high performance as V-type chucks, and have the same basic dimensions
  • Adapter included
    L30000784
  • Power chuck VIT-218
    Power chuck VT-206A4
    Power chuck VT-206A5
    Power chuck VT-208A5
    Power chuck VT-208A6
    Power chuck VT-210A6
    Power chuck VT-210A8
    Power chuck VT-212A11
    Power chuck VT-212A8
    Power chuck VT-215A8
    Power chuck
    Power chuck DN-08
    Vertical and Vertical/Horizontal Stationary Power Chuck

  • DV/DN type power chucks are suitable for vertical milling and drilling operations
  • Due to large through-hole, the vertical/horizontal power chucks clamp not only the long workpiece but also the horizontal holding
    L30000785
  • STATIONARY PNEUMATIC POWER CHUCK 4" 3 SOFT JAWS WITH CYLINDER
    STATIONARY PNEUMATIC POWER CHUCK 5" 3 SOFT JAWS WITH CYLINDER
    STATIONARY PNEUMATIC POWER CHUCK 6" 3 SOFT JAWS WITH CYLINDER
    STATIONARY PNEUMATIC POWER CHUCK 8" 3 SOFT JAWS WITH CYLINDER
    Power chuck
    CHUCK POWER 06" TYPE V-206 ADAPTOR A5
    3-jaw Wedge-type non Through-Hole Power Chuck

  • The chucks are of high performance similar with N-series
  • Metric or UNC socket head cap screws are supplied for installing the chuck to the spindle
  • Alternative spindle adaptors ASA or DIN can be used
  • Adapter is included

    OEM Part Code: Kitagawa #N-200A
    L30000786
  • CHUCK POWER 06" TYPE V-206 ADAPTOR A6
    CHUCK POWER 08" TYPE V-208 ADAPTOR A5
    CHUCK POWER 08" TYPE V-208 ADAPTOR A6
    CHUCK POWER 08" TYPE V-208 ADAPTOR A8
    CHUCK POWER 10" TYPE V-210 ADAPTOR A11
    CHUCK POWER 10" TYPE V-210 ADAPTOR A6
    CHUCK POWER 10" TYPE V-210 ADAPTOR A8
    CHUCK POWER 12" TYPE V-212 ADAPTOR A11
    CHUCK POWER 12" TYPE V-212 ADAPTOR A6
    CHUCK POWER 12" TYPE V-212 ADAPTOR A8
    CHUCK POWER 15" TYPE V-215 ADAPTOR A11
    CHUCK POWER 15" TYPE V-215 ADAPTOR A15
    CHUCK POWER 15" TYPE V-215 ADAPTOR A8
    CHUCK POWER 18" TYPE V-218 ADAPTOR A11
    CHUCK POWER 18" TYPE V-218 ADAPTOR A15
    CHUCK POWER 18" TYPE V-218 ADAPTOR A8
    Power chuck
    CHUCK POWER 12" TYPE V-212R ADAPTOR A11
    Non Through-Hole Power Chuck for vertical lathe

  • The front protection of slide way
  • Suitable for vertical lathe
  • Adapter is included
    L30000788
  • CHUCK POWER 12" TYPE V-212R ADAPTOR A15
    CHUCK POWER 12" TYPE V-212R ADAPTOR A8
    CHUCK POWER 15" TYPE V-215R ADAPTOR A11
    CHUCK POWER 15" TYPE V-215R ADAPTOR A15
    CHUCK POWER 15" TYPE V-215R ADAPTOR A8
    CHUCK POWER 18" TYPE V-218R ADAPTOR A11
    CHUCK POWER 18" TYPE V-218R ADAPTOR A8
    CHUCK POWER 21" TYPE V-221R ADAPTOR A11
    CHUCK POWER 21" TYPE V-221R ADAPTOR A15
    CHUCK POWER 24" TYPE V-224R ADAPTOR A11
    CHUCK POWER 24" TYPE V-224R ADAPTOR A15
    CHUCK POWER 32" TYPE V-232R ADAPTOR A11
    CHUCK POWER 32" TYPE V-232R ADAPTOR A15
    Power chuck V-218RA15
    Power chuck VIT-212RA8
    Power chuck VIT-218RA11
    Power chuck VIT-224RA15
    Power chuck VIT-232RA15
    Power chuck
    Power chuck NT-205
    NT-200 Type 2-jaw Through-Hole Power Chuck

  • All sliding surfaces are hardened and ground for accurate actual running and long service repeatability. Lubrication nipple in each base jaw
  • Base jaw: 1.5mm x 60° serration
  • Mounting: Adapter mounting to fit with DIN, ISO, BS, ASA B5.9 type A spindles
  • Adapter: not included
    L30000834
  • Power chuck NT-208
    Power chuck NT-210
    Power chuck NT-212
    Power chuck NT-215-1
    Power chuck NT-215-2
    THROUGH HOLE POWER CHUCK 6" 2 JAW
    Power chuck
    Power chuck OZ103

    L30000937
    Power chuck OZ123
    Power chuck OZ153
    Power chuck OZ603
    Power chuck OZ803
    THROUGH HOLE POWER CHUCK 5" 3 JAW
    Power chuck
    Power chuck OZ104

    L30000938
    Power chuck OZ124
    Power chuck OZ154
    Power chuck OZ604
    Power chuck OZ804
    Power chuck
    Power chuck OZ1013

    L30000939
    Power chuck OZ6213
    Power chuck OZ8213
    Power chuck
    Power chuck OZ102

    L30000940
    Power chuck OZ122
    Power chuck OZ802
    Power chuck
    Power chuck DR-08
    DR Type 3-jaw Draw Down Power Chucks for machining casting and forging parts

  • Radial clamping ensures almost no uplifting displacement of workpiece
  • The clampped workpiece is appressed to the surtace thus making the DR Type chucks suitable for heavy machining
  • Chuck actuators with cylindrical structure are durable and ensure high clamping repeatability
  • Accurate self-centering and pull back features ensure precise length control machining requirements
    L30000991
  • Power chuck DR-08A6
    Power chuck
    Power chuck BL-12
    BL Type 3-jaw Ball Swing Lock Chuck

  • These chucks can attract the workpiece and hold it on. The jaw operates in two stages: clamping and pulling back, so it can hold the workpiece exactly on the position in front of the chuck, and make it under the stabile situation
  • The BL Type chuck can grasp the workpiece on both O.D. and I.D. clamping, and switch between O.D. and I.D. clamping modes by a simple operation
  • The chuck can grasp up to a 20 degree taper when using a clipper, so the discard process can be ignored on the chucking part of the workpiece
  • The jaw is self-equalizing to max 5° on the O.D. clamping, so it can grasp the workpiece steady
  • Dustproof performance is excellent, and different from regular general purpose chucks. It is structurally dustproof, as there is a dustproof seal in the part of lock arm to prevent the dust ingress
    L30000992
  • Click the links above for product's details or call us at

    The information provided for reference purposes only. Although all possible efforts were made to make this information accurate, we can not guarantee that particular part will fit your application. Specifications can be changed without prior notice. All prices are for reference only and can be changed without prior notice. Not all models are available in all countries due to possible patents and other restrictions.